CYBEX Arc Trainer 626A Owner's Manual page 38

Install foot pads
Have one person lift the unit while a second person places a foot pad under each of the two back feet.
Level unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will
eliminate rocking during use.
Note: References to left and right are from the users perspective during use.
1. Verify foot plates are completely stopped.
2. Grasp one of the rear covers and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
1
1
2
3
4
Page 38 of 83
Description
Foot pads
Description
Rear cover
Lift here
Left rear foot
Right rear foot
Qty.
2
Qty.
2
2
1
1