CYBEX Arc Trainer 626A Owner's Manual page 34

1. Remove a screw and washer from the left handle assembly using two 7/32" Allen wrenches.
2. Slide pivot pin assembly out and remove left handle assembly.
3. Rotate left handle assembly 180 degrees.
4. Apply Loctite to threads inside the pivot pin and screw.
5. Place left handle assembly in position and slide pivot pin assembly back in place.
6. Install the screw and washer to the left handle assembly using two 7/32" Allen wrenches.
7. Remove a screw and washer from the right handle assembly using two 7/32" Allen wrenches.
8. Slide pivot pin assembly out and remove right handle assembly.
9. Rotate right handle assembly 180 degrees.
10. Apply Loctite to threads inside the pivot pin and screw.
11. Place right handle assembly in position and slide pivot pin assembly back in place.
12. Install the screw and washer to the right handle assembly using two 7/32" Allen wrenches.
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
1
2
3
4
1
2
3
4
Page 34 of 83
Description
Screw
Washer
Left handle
Pivot pin assembly
Description
Washer
Screw
Right handle
Pivot pin assembly
Qty.
1
1
1
1
Qty.
1
1
1
1