Completing A Full Lens Calibration - Christie CP2208-LP Installation And Setup Manual

Completing a full lens calibration

Ensure the lens is calibrated before using the projector.
Complete this task whenever a projection lens is installed.
1. On the touch panel controller (TPC), tap Menu > Advanced Setup > Lens Setup.
2. From the Primary Lens list, select a lens.
3. In the Intelligent Lens System area, tap Full Calibration.
4. Tap Yes.
CP2208-LP Installation and Setup Manual
020-102152-03 Rev. 1 (05-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installing and setting up
21