Field
Ethernet Access
Playing content
You can play encrypted and unencrypted content on the projector.
1. To play unencrypted content:
a) Connect the projector to a device with an HDMI to DVI connection.
b) Connect the audio output cables to an audio processor.
See the documentation included with the audio processor for detailed set up instructions.
2. To play encrypted content:
a) Install an Integrated Media Block (IMB).
b) Connect the projector to a network-attached storage (NAS) or direct attached storage
(DAS) device.
CP2208-LP Installation and Setup Manual
020-102152-03 Rev. 1 (05-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Connecting devices to the projector and establishing communication
Description
Grants access to Ethernet connections.
31