Table of Contents
Advertisement
Installing and setting up
Learn how to position and install the projector.
Preparing the installation site
Ensure the installation area is ready for the components.
1. Clear the installation area.
2. Post laser hazard warning signs at all entry doors.
3. Place each component near its installation location.
Lifting and positioning the projector
Safely lift and position the projector in the location where it will be used.
Warning! If not avoided, the following could result in death or serious injury.
•
A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
Before lifting and positioning the projector, refer to the light intensity hazard distance clearance
requirements (on page 8).
1. Position each person at the corners of the projector.
CP2208-LP Installation and Setup Manual
020-102152-03 Rev. 1 (05-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
13
Advertisement
Table of Contents
