Table of Contents
Advertisement
•
Zone A—The light intensity may cause eye damage after a momentary or brief exposure
(before a person can avert his or her eye away from the light source). The light may cause
skin burns to occur.
Within Zone A, ensure the beam is at least 2.0 m, or 2.5 m (US only), above the floor where the
audience is permitted to stand, with at least 1.0 m clearance below or lateral.
For US market only, hazard distances based upon FDA guidance document 1400056, Classification and
Requirements for Laser Illuminated Projectors (LIPs), dated February 18, 2015:
Projection lens
1.2-1.72:1, 0.69" DLPCine zoom
lens
1.33-2.1:1, 0.69" DLPCine zoom
lens
1.62-2.7:1, 0.69" DLPCine zoom
lens
2.09-3.9:1, 0.69" DLPCine zoom
lens
For all other markets, hazard distances based upon IEC 62471-5:2015, Photobiological safety of lamps
and lamp systems – Part 5: Image projectors:
Projection lens
1.2-1.72:1, 0.69" DLPCine zoom
lens
1.33-2.1:1, 0.69" DLPCine zoom
lens
1.62-2.7:1, 0.69" DLPCine zoom
lens
CP2208-LP Installation and Setup Manual
020-102152-03 Rev. 1 (05-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Part number
108-494108-XX
108-495109-XX
108-496100-XX
108-497101-XX
Part number
108-494108-XX
108-495109-XX
108-496100-XX
Safety precautions
Zone A (m)
0 to 1.6
0 to 2.2
0 to 3.0
0 to 4.4
Zone A (m)
0 to 0.8
0 to 1.0
0 to 1.3
9
Advertisement
Table of Contents
