TaiShan 2280 V2 Server
User Guide
l
l
12.2 ESD Wrist Strap
A cabinet or chassis is properly grounded.
Step 1 Put on the ESD wrist strap. See
Figure 12-2 Wearing an ESD wrist strap
Step 2 Tighten the ESD wrist strap to ensure that it is in good contact with your bare skin.
Step 3 Insert the ground terminal of the ESD wrist strap into the ESD jack in a cabinet or chassis.
----End
Issue 01 (2019-07-01)
During parts replacement, keep new server components in ESD bags before installation,
and place removed server components on conductive mats for temporary storage.
Do not touch welding points, pins, or exposed circuits.
Copyright © Huawei Technologies Co., Ltd.
Figure
12-2.
12 Preventing Electrostatic Discharge
139