Checking The Server - Huawei TaiShan 200 Series User Manual

TaiShan 200 Server
User Guide (Model 2280)

5.10.5 Checking the Server

Check the server in the sequence shown in
depends on the actual situation.
For details about CLI commands, see the
Figure 5-33 Checking the server
Procedure
Step 1 Check indicator status.
Ensure that hardware devices are working correctly.
For details, see
Indicators.
Step 2 Check the server.
●
Issue 04 (2020-01-16)
2.2 Front Panel Indicators and Buttons
Check the server using the iBMC WebUI.
a. Log in to the iBMC over the WebUI. For details, see
the iBMC WebUI.
You are advised to change the initial password when logging in to the iBMC for
the first time. For details, see
Copyright © Huawei Technologies Co., Ltd.
Figure 5-33. The method to be used
TaiShan Rack Server iBMC User Guide
and
5.10.6 Changing Initial
5 Install and Configure
2.4 Rear Panel
5.10.4 Logging In to
Passwords.
.
76