Table of Contents
Advertisement
Marker Specifications
Function: The Sequencer can be programmed to produce a Marker signal at any step of the Sequence.
This Marker is available as both positive- and negative-going TTL/CMOS-compatible pulses via
front-panel coaxial (SMB-type) connectors. It can also be programmatically directed to assert any or all
of the VXI trigger busses.
Output Levels:
Front-Panel SMBs
Maximum Continuous Output Current:
High, Open-Circuit:> 4.4V
Low, Open-Circuit: < 0.1V
Output Impedance:
VXI Trigger Busses: meet VXIbus specifications
Pulse Width:
To Front-Panel SMBs: Duration of Timing Cycle
To VXI TTL Trigger Bus: Duration of Timing Cycle
To VXI ECL Trigger Bus:
(marker asserted for first 2 subcycles only)
Miscellaneous Specifications
Power Requirements:
+ 5V (Excluding Control Output load current): 1.6A peak, 80mA dynamic
-5.2V: 8.9A peak, 150mA dynamic
-2V: 5.9A peak, 150mA dynamic
Cooling:
Average Power/Slot: 32 Watts
Ambient Temperature
Operating: 0 to 55
Storage : -40 to 75
Humidity: 65% relative from 0 to 40
Airflow Required per Slot (for 10
Weight: 3.0 kg
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
±
24 mA
≅
Ω
50
≥
±
2 Subcycles
2ns
°
C
°
C
°
C
°
C rise): 2.8 liter/sec at 0.9mm Water
±
5ns
±
5ns
Agilent E1450 Specifications A-7
Advertisement
Table of Contents
