Specifications; General Specifications; Drive Power Supply Specifications; Supplement Characteristics - Agilent Technologies 11713B Operating And Service Manual

3

Specifications

General Specifications

Drive Power Supply Specifications

Supplement Characteristics

38
Specifications below describe warranted performance over the
temperature range 0 to +50
operation, unless otherwise noted.
Table 7 11713B/C Drive Power Supply Specifications
Voltage
Current
* For 11713C only
Supplement characteristics are intended to provide useful
information and are typical but non- warranted performance
parameters.
Table 8 11713B/C Supplemental Characteristics
Power
Response Time
Driver Life
Maximum Load
Inductance
Maximum Load
Capacitance
°
C after one hour of continuous
+24 ± 8% Vdc
*
+5 ± 5% Vdc
*
+15 ± 12% Vdc
1.7 A maximum continuous current
Contact pairs 1 through 8, 9, and 0, maximum current of 1.7 A
continuous through all contacts (< 0.7 A per contact)
100 to 240 Vac, automatic selection, 50/60 Hz
100 VA maximum
Mains supply voltage fluctuations are not to exceed 10 percent
of the nominal supply voltage
100 μs maximum for contact pairs 1 through 8
20 ms maximum for contact pairs 9 and 0
> 2,000,000 switchings at 0.7 A for contact pairs 9 and 0
500 mH
< 0.01 μF for contact pairs 9 and 0
11713B/C Operating and Service Manual