Table of Contents
Advertisement
Chapter 2
Configuration and Wiring
Using this Chapter
This chapter contains configuration and wiring information for the Agilent E1450 Timing Module, the
optional Agilent E1453 Timing Pod, and the optional module to DUT interface cables. For complete
details on installing this equipment in a C-Size mainframe, refer to the "Agilent 75000 Model D20
Hardware Installation Guide" and the "C-Size VXIbus Systems Installation and Getting Started Guide".
WARNING
SHOCK HAZARD. Only service-trained personnel who are aware of the hazards in-
volved should install, remove, or configure the system. Before you perform any
procedures in this guide, disconnect AC power and field wiring from the mainframe.
Caution
STATIC ELECTRICITY. Static electricity is a major cause of component failure. To prevent damage to
the electrical components in the mainframe and plug-in modules, observe anti-static techniques
whenever handling a module.
Configuration and Wiring 2-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
