Omni 4000 Series Installation Manual page 91

The OMNICONNECT home page opens in the Home tab on the ribbon bar, which houses the
main components of the OMNICONNECT system for initial configuration and later operations
(Figure 4-4).
Home
The three main components of the Home ribbon (Figure 4-5) are Setup, Actions and View
(Table 4-3).
Table 4-3: Home Ribbon Elements and Descriptions
Setup Box
Sites
Preferences
Log Comms
4-31
OMNI 4000/7000 Installation Guide – Rev H
Figure 4-4: OMNICONNECT Home Page
Figure 4-5: OMNICONNECT Icons
Home Ribbon Elements
Opens the Sites Setup window and is used to configure the
connection sites for communicating with the units.
Opens the Preferences window and is used to set the location in
your PC where OMNICONNECT will save the reports, archives
and other configurations that are set within the software.
Enables the logging of the Modbus communications between the
OMNICONNECT user interface and the flow computer screens.
Configuration
Descriptions