4.7
Configure OMNICONNECT
When configuring the OMNICONNECT connection on your PC, follow the instructions in this
section in conjunction with OMNICONNECT Help.
At any point, you may press F1 on your keyboard to access OMNICONNECT
Help for more detailed descriptions of each window, screen and field. Your
cursor must be on the window, screen or field.
4.7.1 Startup Screen
When OMNICONNECT opens, you must choose the required type of application (Figure 4-3). For
more information about the different application choices presented on this screen, open
OMNICONNECT Help by clicking on the Help button in the lower left-hand corner of the window.
The different types of applications (liquid, gas, liquid and gas) share the basic general setup
configurations, with some variation. Choose the type of application based on the parameters of
your flow computer.
4-30
OMNI 4000/7000 Installation Guide – Rev H
®
Connection
Figure 4-3: Startup Screen
Configuration