The Omni 4000/7000 Series; Users Of The Guide; Certifications And Standards - Omni 4000 Series Installation Manual

1. The OMNI 4000/7000 Series

The Installation Guide for the OMNI 4000 and OMNI 7000 series of flow computers includes:
•
An overview of the OMNI 4000/7000 flow computer.
•
Installation instructions.
•
Configuration instructions.
•
Calibration instructions.
•
Acceptance testing guidelines and troubleshooting.
Review these instructions and guidelines to ensure a safe installation and startup of your OMNI
4000/7000 flow computer.
1.1

Users of the Guide

As a user reference guide, the OMNI 4000/7000 Installation Guide is intended for an audience
with knowledge of liquid and gas flow measurement technology. The user does not need to be an
expert to use certain portions of this manual. However, some flow computer features require a
certain degree of expertise and/or advanced knowledge of liquid and gas flow instrumentation
and electronic measurement.
This manual is written for:
•
Installers.
•
System and Project Managers.
•
Engineers and Programmers.
•
Advanced Technicians.
•
Operators.
Only qualified personnel should install, configure and calibrate OMNI flow computers.
1.2

Certifications and Standards

OMNI 4000/7000 flow computers have earned the following certifications:
Nederland Meetinstituut (NMi)
2004/108/EC
2004/22/EC
OIML R117-1
WELMEC 7.2
WELMEC 8.8
EN 55011:2009+
A1:2010
1-1
OMNI 4000/7000 Installation Guide – Rev H
Electromagnetic Compatibility Directive
Measuring Instruments Directive
Dynamic Measuring Systems for Liquids Other Than Water Standard,
Edition 2007; part of MID Software Guide–Measuring
Software Guide Measuring Instruments Directive, Chapter P and
Extensions L, T, S, D and I5, Edition 2015
General and Administrative Aspects of the Voluntary System of
Modular Evaluation of Measuring Instruments under the MID, Edition
2:2012
Industrial, Scientific and Medical (ISM) Equipment–Radio-Frequency
Disturbance Characteristics
The OMNI 4000/7000 Series