Connect To The Flow Computer - Omni 4000 Series Installation Manual

If you are connected to a proxy server, you
4.
must select the Enabled checkbox and
complete the fields.
Contact the network administrator
for proxy information.
5. Click OK when you have changed
preferences.

4.7.4 Connect to the Flow Computer

To connect the OMNICONNECT software to the flow computer, follow these instructions:
1. Click the Online button in the Home
ribbon to see the Connect to OMNI
window.
2. In the Connect to OMNI window, choose
which unit to connect with from the list
presented.
These are the sites and units you
previously created in Section 4.7.2
Setup Sites .
Double click or click to highlight and click
Connect.
In the Password window, select the
3.
Administrator user from the drop-down
list, or User 00. The default factory
password is omni in lowercase letters.
Click OK.
If you already changed your
password and set up users, then
enter your own password.
4-41
OMNI 4000/7000 Installation Guide – Rev H
Configuration