Press F1 to access
OMNICONNECT Help for
assistance.
After you complete each screen, click
5.
Apply to save your changes.
6.
Select Meter Temperature to display the
configuration options.
7.
Select an I/O Point using the
drop-down box.
8.
a. Fill in the remaining information in
the Meter Temperature screen.
b. When you are finished, click Apply
to save the changes.
Press F1 to access
OMNICONNECT Help for
assistance.
Select Meter Pressure to display its
9.
configuration options.
Select an I/O Point using the
10.
drop-down box.
4-66
OMNI 4000/7000 Installation Guide – Rev H
Configuration