Nema 4X Enclosure Installation - Omni 4000 Series Installation Manual

15. To complete installing the OMNI 7000
I/O cable:
a. Connect I/O Cable A to CONN A
and I/O Cable B to CONN B on the
motherboard in the chassis.
b. Verify that the cables are correctly
connected.

3.4.4 NEMA 4X Enclosure Installation

Figure 3-13 illustrates the NEMA 4X enclosure.
24.9
[632]
To safely install a NEMA enclosure, follow these instructions:
Verify that the surface of the structure
1.
where the enclosure will be mounted is a
bonded metal surface and connected to an
Earth Ground.
CAUTION: The approximate weight of a single OMNI 4000/7000 NEMA 4X
enclosure is 87 lbs. (39.43 kg). The structure to which the enclosure will be mounted
must be capable of supporting this weight.
Verify that the structure can support the
2.
weight of the enclosure.
3-14
OMNI 4000/7000 Installation Guide – Rev H
21.4
[544]
22.1
[562]
23.6
[600]
22.1
[562]
MOUNTING HOLES
M8 BLIND RIVITS
Ø
AND MTG BRACKET
Figure 3-13: NEMA Enclosure
Installation
11.8
[300]
23.6
[600]