Configure Report Setup - Omni 4000 Series Installation Manual

6. Click Apply to complete the configuration.
7. Continue selecting and completing fields
for each Ethernet port as you move down
the Configure tree.

4.10.9 Configure Report Setup

To select the report templates for the flow computer, follow these instructions:
1. Select the Report Setup function in the
Configure tree in the left panel to display
its configuration settings in the screen on
the right.
a. Fill in the information in all of the
2.
fields, as necessary.
b. When you have finished with each
screen, click Apply to save
the changes.
Press F1 to access
OMNICONNECT Help for
assistance.
4-75
OMNI 4000/7000 Installation Guide – Rev H
Configuration