5.
Expand the next module in the tree and
select Process Inputs. Repeat Steps 3
and 4 for each module.
Configure Analog Outputs
Each flow computer module has one or two analog outputs that can be configured to send an
analog signal out to other devices, if required.
To configure analog outputs, follow these instructions:
a. In the Configure tree in the left
1.
panel, select OMNI I/O.
b. Select Process I/O.
c. Select the module (A-1).
d. Select Analog Outputs.
2.
With Analog Outputs selected in the left
panel, the right screen displays the
different output configuration options
available for this type of module. Fill in the
required information in these screens.
Press F1 to access
OMNICONNECT Help for
assistance.
4-60
OMNI 4000/7000 Installation Guide – Rev H
Configuration