Loading And Unloading - Flashforge Creator 3 User Manual

1. Tap [Tools]-[Filament]-target extruder[Load] in turns on the touch screen, wait for extruder heating up.
Click the temperature value, and a window for modifying the temperature value will pop up . The default filament
loading temperature is 220 degrees.When high temperature filament such as ABS/ PC are needed, please click to
modify the temperature value.
2. Install filament spool on the printer, thread filament through filament detecting components; Insert filament into
filament intake until filament goes through white filament guidetube.

3.3 Loading and Unloading

[Loading]
17