Loading And Unloading - Flashforge Creator Pro 2 Quick Start Manual

Print
1. Tap [Tools]-[Filament]
L Extruder
Load
Unload
2. Tap [load], the extruder will start to heat up. After heating to the target temperature,
please manually insert the filament into the filament feeding wheel. When the filament
is ejected from the nozzle, it indicates that loading is completed.
3. Tap [unload], the extruder starts to heat up. After heating to the target temperature,
manually feed out a part of filament from the nozzle, then press down the spring
presser, quickly pull out the filament, and complete unloading.
The First Setting

Loading and Unloading

Preheat Tools
R Extruder
Load
Unload
Filament Level
Setting Status
L Extruder
8
Home
About
Heating...
75℃ / 220℃
Manual