Preheat - Flashforge Creator 3 User Manual

Tap[Preheat],enter preheat interface.
Preheat interface:
1. Turn on/off: turn on left/right build plate preheating
function, turn off left/right build plate preheating function.
2. Temperature value: tap '-' '+'temperature value to set
preheating temperature.
3. Start: tap[Start],extruder or build plate starts to preheat.

5.2 Preheat

Extruder/build plate heating interface:
1. Actual temperature value;
2. Target temperature value;
3. Stop: stop to preheat;
38