Tools - Flashforge Creator 3 User Manual

Tap[Tools] to enter tools setting interface.
Tools interface
1. Filament change: loading/unloading operation;
2. Leveling: level build plate;
3. Zero returning: to make printer X/Y/Z-axis go back to
zero;
4. Manual adjusting: Manual adjust the position of
X/Y/Z-axis;
5. Setting: Related functions setting;
6. State: Check printer real-time state;
7. About: Check printer version information;

5.3 Tools

[Tools]-[Filament]
Loading/unloading interface:
1. Loading interface;
2. Unloading interface;
3. Left extruder loading button;
4. Right extruder loading button;
5. Left extruder unloading button;
6. Right extruder unloading button;
7. Start: Tap[start],loading/unloading starts.
39