Loading/Unloading Filament; Loading Filament - Flashforge Dreamer User Manual

D.

Loading/unloading Filament

Filament must pass through the extruder and into the heating block in
order to be melted. In this user guide, we will demonstrate loading and
unloading filament using the left side extruder.

Loading filament:

1. Remove the lid of the Dreamer
2. From the main menu, press the right
icon labeled [ Tools
3.Select [ Filament ]
Left ].
Dreamer User Guide |
].
and [ Load
www.ff3dp.com
19