Flashforge Creator 3 User Manual page 38

Print interface
1.Abort: To abort the print job.
2.Pause/Resume: To suspend or resume the print job.
3.More: Real-time check or change: filament setting,
lights-off setting,print speed,print schedule,filament
usage,print time and Z-axis coordinate
4.Left/Right Extruder temperature,build plate
temperature:
Can be modified during printing.
Tap more buttons during printing
Real-time check or change: filament setting, light-off setting,print details(print speed,filament use,print time,Z-axis
coordinate)
1. Filament changing: Tap[Filament] to change filament during printing.(This function works after pausing printing).
2. Turn off the light: Tap[Light off]to turn off the lights during printing.
3. Details:
a）Print speed: To set print speed value during printing.
b）Filament use: Check filament usage amount.(m)
c）Print time: Check print time
d）Z-axis: Check Z-axis coordinate
e）Back: Cancel tool instructions,go back to print interface.
To set extruder printing speed during printing
To set the printing speed during printing: Tap [Yes] to save the setting while tap [No] to cancel the setting.
To modify left/right Extruder and baseboard
temperature:
After temperature has reached target temperature,
temperature figure will be underlined in print interface,
choose number box,modify extruder temperature by
tapping '-' '+'.Tap [Yes] to save the setting while tap [No] to
cancel the setting.
37