Internet Connection - Flashforge Creator 3 User Manual

3.5 Internet Connection

· Ethernet connection
Connect your Creator 3 with your PC viaa Ethernet cable, connection successfully when you see on the right
corner.
· WiFi connection
Tap[Tools]-[Setting]-[WiFi],turn on WiFi to choose your WiFi. Connection successfully when you see on the right
corner.
· Hotspot connection
1. Tap[Tools]-[Setting]-[WLAN hotspot] to turn on hotspot.You can set hotspot name and password. Turn on the hotspot
successfully when you see on the right corner.
2. Use laptop to search your hotspot,connect and input password.
Note: If you have more than one printers,enter WLAN hotspot to modify hotspot name separately.
22