Print Start-Up - Flashforge Creator 3 User Manual

Please complete the leveling,loading and calibration correctly with the guidance of User Guide at first print.
· Print from internal memory card
Tap[Tools]-memory card icon on the touch screen,choose printed files saved in internal memory card already. The print
file copy by this method is not supported.
· Print form USB stick
Tap[Tools]-USB stick icon on the touch screen,choose printed files saved in USB stick already.Support to copy the print
file to device internal memory card.
· Print from Network Transmission
The network transmission printing method is limited to the device and the computer within the same LAN, regardless of
the use of wired network connection or wireless network connection.
1.Refer to page 22 Internet connection to connect successfully.
2. Tap[Tools]-[About] in turns on the touch screen, check and record Ethernet IP address:10.33.23.180(The example is for
reference only, with the local IP address as the criterion.).
3.Tap FlashPrint menu bar in turns [Print]-[Connect machine],choose[Ethernet]connection,input:10.33.23.180:8080(The
example is for reference only, with the local IP address as the criterion).
After connecting successfully, you will see

4.2 Print Start-up

on the bottom right corner.
29