Table Of Contents - Flashforge Creator 3 User Manual

1. Introduction
1.1 About Creator3
1.2 Accessories
1.3 Product Parameters
1.4 Terms
2. Unpacking and Hardware Assembly
2.1 Unpacking
2.2 Hardware Assembly
3. First Installation
3.1 Leveling
3.2 Filament Installation
3.3 Loading and Unloading
3.4 Calibration
3.5 Internet Connection
3.6 Flashforge Software
3.6.1 Software Installation
3.6.2 Software Interface
3.6.3 Set Dual Extruder Print
4. Operation
4.1 Filament
4.1.1 Filament Compatibility
4.1.2 Print Setting
4.2 Print Start-up
4.3 Model Removal
4.4 Support Removal
4.5 Camera Connection
5. Introduction of Touch Screen
5.1 Print
5.2 Preheat
5.3 Tools
6. Maintenance
6.1 Log Copy
6.2 Maintenance and Service
6.3 Extruder Unclogging
6.4 Daily Maintenance and Use Suggestion
7. Support and Service
CONTENT
------------------------------------------------------------------------- 05
------------------------------------------------------------------ 13
---------------------------------------------------------------------------- 28
----------------------------------------------------------------------- 47
------------------------------------------------------------- 49
------------------------------------ 09
----------------------------------------------- 36
04
05
06
07
08
09
12
13
15
17
19
22
23
23
23
24
28
28
28
29
32
32
33
36
38
39
47
47
48
48