Flashforge Software; Software Installation; Software Interface - Flashforge Creator 3 User Manual

FlashPrint
Choose machine type of Creator 3 from FlashPrint menu [Print]-[Machine Type],the main screen displays. Interface
overview shown as follows:
1 2
6
1. Menu bar 2. Adjust zone
6. Printer type 7. 3D models
3.6 FlashPrint Software

3.6.1 Software Installation

1. Software Acquisition
You can choose from two methods to acquire FlashPrint software installation package:
Method 1： To get the installation package from the USB stick in the toolkit.
Method 2 ： Enter FlashForge official website: www.sz3dp.com. Downloadsoftware
version you needed from Support - Support center-Flashprint.
2. Software Installation and Start-up
Open setup and follow instructions to complete installation. Start FlashPrint after
installation completed.

3.6.2 Software Interface

3
3. Load model file
8. Build plate front direction
4 5
7 8
4. Support setting
9. Printer connection status
23
9
5. Print