Flashforge Creator 3 User Manual page 42

[Tools]-[Manual]
Tap[Manual],enter manual adjustment mode:
1. Y+: The extruder moves to the zero point, that is, the back of the machine;
2. Y-: The extruder moves to the direction opposite to the Y+;
3. The left extruder moves to the zero points, that is, to the right direction;
4. The left extruder moves to the direction opposite to the X+;
5. The right extruder moves to the zero points, that is, to the left direction;
6. The right extruder moves to the direction opposite to the X+;
7. The build plate descends;
8. The build plate elevates.
[Tools]-[Setting]
Tap [setting]to enter setting interface
1. Language: To set the display language;
2. Wi-Fi: To turn on/off the Wi-Fi;
3. WLAN hotspot: To turn on/off the WLAN hotspot;
4. FlashCloud: turn off/on Cloud connection;
5. Door Opened Pause: To turn on/off the Door Opened Pause;
6. Door Opened Remind: To turn on/off the Door Opened Remind;
7. Startup Sound: To turn on/off the startup Sound;
8. Left Filament Check: To turn on/off the filament check on left extruder;
9. Right Filament Check: To turn on/off the filament check on right extruder;
10. Calibration: To adjust the initial distance between the extruder and the build plate;
41