Flashforge Creator 3 User Manual page 47

[Setting]-[Steel Brush/Rubber]
Nozzle-wiping options: the device supports two types of brush:
Steel brush ：extruder moving at Y direction;
Metal panel：extruder moving at X direction; When the nozzle is switched, a section of filament will be spit out in
advance to avoid the oozing. The rubber brush is a new option, suggest to use it.
[Tools]-[Status]
Check left/right extruder temperature, platform temperature,filament loaded/unloaded, door opened pause and
cooling fan details and extruder XYZ coordinates positions.
[Tools]-[About]
It displays the basic information about the device. for details shall be subject to the device.
Note: Please provide the printer serial number to after-sales when your printer need maintenance.
46