Flashforge Creator 3 User Manual page 31

Hide thumbs Also See for Creator 3:

Table of Contents

· Print from hotspot connection

1.Refer to Page 22 hotspot connection to connect successfully.

2.Tap[Tools]-[About] in turns on the touch screen, check and record WiFi IP address:10.33.23.180(The example is for

reference only, with the local IP address as the criterion.)

3.Tap FlashPrint menu bar in turns [print]-[connect machine],choose[Wi-Fi]connection,input:10.33.23.180:8080(The

example is for reference only, with the local IP address as the criterion).

After connecting successfully, you will see

· Print from FlashCloud

1. Turn on WiFi or Ethernet to connect the internet.

2. Tap[Tools]-[Setting]to turn on FlashCloud.

3. Enter FlashCloud website: http://cloud.sz3dp.com to operate:

E-mail

Password

Remember password

Forgot password

① Register FlashCloud account and login in on FlashCloud website: http://cloud.sz3dp.com.

on the bottom right corner.

Table of Contents

Show Quick Links

Chapters

Table of Contents