Configuration / Set-Up Menu - Kessel Comfort Plus SD Instructions For Installation, Operation And Maintenance

7

Configuration / Set-up menu

General information
The control unit menu guidance has an operating and standby mode.
In operating mode the system settings can be displayed and adjusted on the display.
If over a period of approx. 60 seconds none of the keys are pressed, standby mode is activated automatically, the
background lighting of the display is then switched off.
66 Cursor up
67 Cursor
down
68 ESC
72 OK
0 System info
1 Information
1.1 Hours of operation
1.2 Log book
1.3 Control type
1.4 Maintenance due
1.5 Current measured values
Configuration / Set-up menu
Navigation keys for the menu
Scrolling in the menu
Scrolling in the menu
Deletion of an entry, back
Confirmation of an entry, next level
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.1.8
1.1.9
1.1.10
1.4.1
1.4.2
1.5.1
1.5.2
1.5.3
1.5.4
1.5.5
1.5.6
Total running time
Run time pump 1
Operating cycles 1
Power outage
Energy usage
Run time pump 2
Operating cycles 2
Backwater phase
Backwater occurrences
Switching cycles flap
Last maintenance
Next maintenance
Mains power
Battery voltage
Level
Mains voltage
Temperature
Flap current
42 / 148
h 0 - 999,999.9
h 0.0 - 9,999.9
X 0 - 999,999
h 0.0 - 999,999.9
kWh 0.0 - 999,999.9
h 0.0 - 9,999.9
X 0 - 999,999
h 0.0 - 9,999.9
X 0 - 999,999
X 0 - 999,999
mm:hh - dd.mm.yy
mm:hh - dd.mm.yy
A 0 - 99.9
V 0 - 99.9
mmWS 0 - 5000
V 0 - 999
°C -9 - 99
mA 0 - 999
2018/02