5.1
Configuration / Set-up menu
General information
The control unit menu guidance has an operating and standby mode.
In operating mode the system settings can be displayed and adjusted on the display.
If over a period of approx. 60 seconds none of the keys are pressed, standby mode is activated automatically, the
background lighting of the display is then switched off.
66
Cursor up
67
Cursor down Scrolling in the menu
68
ESC
72
OK
Activating operating mode
•
Press the OK key <72> on the control panel, the background lighting
on the display lights up and the start window (system information)
appears.
»
Opening the menu
•
Press OK <72>, level 1 of the menu (see 7.1. Menu structure) is
activated.
Navigation within the menu
Action
Select menu item
Activate menu point for editing
Display or edit set value
Quit menu
V 1.0
Technical data
Navigation keys for the menu
Scrolling in the menu
Deletion of an entry, back
Confirmation of an entry, next level
Operation
Cursor up / cursor down, selected menu item is shown inverted
OK. If a menu sub-item exists, this is shown inverted.
OK, value is displayed or shown inverted for setting
ESC, leave current level, moves up a level
33 / 20
- bzw. Schwimmeranzeige
72
Abb. [8]