Hoffman monty 8600 Series Operation Manual page 20

Specifi cations
1.3 Machine models
This manual deals with machine models that share
the same structure and basic functionality, but that
can vary in terms of the automated equipment fi tted.
However, there may be differences with regard to the
power supply and the presence/absence of the beading
device for tubeless tires, or for further specifi cations.
The different versions are set out below:
ADVENCED
Tubeless System
Figure 1-3.1 represents the basic machine with
1.3-2
automatic Head (integrated lever).
1.3-1
ADVENCED GP
Figure 1-3.2 represents the same machine as above,
1
but it is also equipped with a beading unit for tubeless
tires.
2
GOLD
Figure 1-3.3 represents the machine with automatic
head and fi tted with: MH bead pusher (1), laser pointer
3
(2) and shoulder press arm (3).
4
PLATINUM
Figure 1-3.4 represents the same version as above
but with the integrated Tubeless beading system (4)
5
and wheel lifter (5).
1.3-3 1.3-4
Types of power supply:
1
230 Vac, 1 Ph, 50 Hz.
or
230 Vac, 1 Ph, 60 Hz.
1.4 Identifi cation data
An identifi cation plate attached to the machine, in
d
b c
e
position 1, Fig. 1.4-1, shows the following data:
a- Name and address of the manufacturer
f
b- Conformity marking
g
c- Year of manufacture
h
d- Model
e- Serial number
i
f- Weight
g- Electric specifi cations (volt, ph, Hz, kW and A)
a
h- Air pressure required
i- Acoustic pressure
1.4-1
20