Table of Contents
Advertisement
P/N: EAL0408G78A
P/N: EAL0424G33A
P/N: EAL0413G11A
P/N: EAL0413G12A
10
Safety
EAL0408G78A
Personal protection devices warning.
All the devices listed on the plate must be used to
•
operate the equipment.
Wear the devices indicated before operating the
•
equipment.
THE USE OF PERSONAL PROTECTION DEVICES
IS LAID DOWN BY THE LAW.
EAL0424G33A (symbol on Dangers Plate)
Risk of fl ying fragments during beading.
The beading operation with the TUBELESS device
•
can result in fl ying objects and loud noise levels.
We therefore recommend the use of protection
equipment for eyes and ears.
When using compressed air for the beading
•
operation there is the risk of the tire exploding.
Avoid excessive pressure. Do not exceed the
•
maximum pressure indicated on the tire.
The risk of explosion is also dependant on the
•
conditions of the tire. Check the tire before
infl ating it.
EXPLODING TIRES CAN CAUSE SERIOUS
INJURY OR EVEN DEATH.
EAL0413G11A
Wheel lifter maximum carrying capacity.
The tyre weight must be known.
The plate indicates the wheel lifter carrying
•
capacity.
The mechanical parts of the wheel lifter can
•
be compromised by excessive loads.
For particularly heavy tires, we recommend
•
identifying the exact weight, with a suitable
instrument, before loading on the tyre
changer. Do not use the wheel lifter if the
weight exceeds the maximum weight allowed.
Maintain a safe distance when in movement.
•
COMPLY WITH THE CARRYING CAPACITY OF THE
WHEEL LIFTER .
EAL0413G12A
Indications on the hooking point for lifting and
moving the tyre changer.
The plate indicates where to secure the tyre
•
changer in order to lift it.
Use lifting devices with an adequate carrying
•
capacity in relation to the weight of the tyre
changer.
Maintain a safe distance when in movement.
•
FOLLOW THE INDICATIONS SUPPLIED FOR
MOVING THE EQUIPMENT.
IMPORTANT!! SAVE THESE
INSTRUCTIONS
Advertisement
Table of Contents
