Table of Contents
Advertisement
2
6
11
12
1
8
3
10
7
18
4
14
9
5
1.2-1
Safety
Note:
Suggestion or explanation.
CAUTION: STRESSES THAT THE FOLLOWING
ACTION MAY CAUSE DAMAGE TO THE UNIT OR
OBJECTS ATTACHED TO IT.
WARNING: STRESSES THAT THE FOLLOWING
ACTION MAY CAUSE (SEVERE) INJURY TO THE
OPERATOR OR OTHERS.
6
9
• Bulleted list:
• Indicates that the action must be executed by the
operator before being able to go to the next step in the
sequence.
13
1.2 Safety Devices
WARNING: DO NOT BYPASS ANY SAFETY
FEATURES.
This machine has several protectors to prevent
compression or crushing hazards.
List of safety devices:
Figura 1.2-1
1. gear motor transmission guard
2. arm guard
3. motor drive guard
4. upper cover
5. pedal control guard
6. control lever guard
7. power supply cut-out
8. Lifter guard
9. bead breaker arm cylinder guard
10. beading device limiter
11. demounting-head control guard
12. demounting-head guard
13. Actuator guard
14. Control panel guard
- The rotation speed of the chuck has been limited to a
maximum of 14 rpm to prevent dragging or entrapping
hazards.
- Rotation of the turntable is automatically inhibited
when the main switch is off (position 0) as well as the
pre-positioned pedal control release.
WARNING: IN THE EVENT OF MALFUNCTION OR
BREAKAGE OF ONE OF THE SAFETY DEVICES,
DO NOT USE THE MACHINE AND CONTACT THE
ASSISTANCE SERVICE TO RESTART.
Advertisement
Table of Contents
