Download  Print this page

Function Test; To Do A Check Of The Operation Conditions - Husqvarna P524 EFI Workshop Manual

Hide thumbs

Advertisement

5.1 To do a check of the operation
conditions
The operation conditions are as follows:
The engine can only be started when the drive of the
blades is disengaged.
The engine can only be started when the parking
brake is applied.
The drive of the blades can only operate when the
operator sits in the seat.
Do a check of the operation conditions daily.
1. Try to start the engine with the drive of the blades
engaged. If the operation conditions works, the
engine does not start.
2. Try to start the engine without the parking brake
applied. If the operation conditions works, the engine
does not start.
3. Start the engine, engage the drive on the blades and
lift from the seat. If the operation conditions works,
the blades in the cutting deck stop.
662 - 001 - 23.10.2018

5 Function test

Function test - 11

Advertisement

loading