Husqvarna P524 EFI Workshop Manual page 13

Table of Contents

Advertisement

Maintenance
Lubricate according to the lubrication chart.
Hydrostatic cable with links.
Parking brake wire.
Throttle control.
Choke control.
Pivoting wheel.
Belt adjuster.
2. ENGINE
2.1 SERVICE MAINTENANCE SCHEDULE FOR ENGINE FROM
OEM
Check that the spark plug is clean and properly gapped
Clean the combustion chamber
2.2 FUEL SYSTEM
Check the fuel hose. Replace if necessary.
Change the fuel filter.
2.3 AIR INTAKE SYSTEM
Replace the air filter's prefilter.
Replace the air filter's pre-filter and paper filter.
2.4 COOLING AND STARTER SYSTEM
Inspect the cooling fins on the hydrostatic transmission.
Clean the engine and transmission.
2.5 EXHAUST SYSTEM
Examine the muffler and heat deflector
2.6 OIL SYSTEM
Replace engine oil* (SAE 10W/40).
Change the oil filter
2.7 ELECTRICAL AND IGNITION SYSTEM
Replace the spark plug.
Check lights.
3. TRANSMISSION, CONTROLS AND DRIVE SYSTEM
3.1 INSPECT AND ADJUST IF REQUIRED:
Front and rear wheel rotation speed. (Only AWD)
Check the oil level in the transmission and top up if necessary
(SAE 10W/50)
Air pressure in the tyres
Parking brake.
3.2 REPLACE:
Suction filter in the hydraulic tank.
Hydraulic oil filter.
662 - 001 - 23.10.2018
Daily
Week-
First
ly
10 h
40 h
25 h
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Maintenance interval
in hours
100 h
200 h
400 h
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Servicing - 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents