Changing Oil In The Front Axle - Zetor HORTUS HS Series Operator's Manual

Changing Oil in the Front Axle

1. Maximum Level
2. Minimum Level
Refill the transmission to the correct level on the dipstick with new oil.
Capacity: 4.3 US gal (16.4L)

1 - Top Plug (Vent Plug)
1. Oil Dipstick
2. Drain Plug
IMPORTANT:
After refilling the prescribed amount of new oil, the level measured by the dipstick may be

higher than permitted - due to incomplete filling of the front-wheel axle drive mechanism - this
discrepancy will disappear after being put back into operation.
Unscrew the vent plugs to accelerate the proper pumping of the oil by the front axle drive

system.
92
MAINTENANCE
HODP115
HODP116
HODP117