Cleaning And Changing Filters; Engine Oil Filter; Cleaning Oil Water Separator Of Fuel Filter - Zetor HORTUS HS Series Operator's Manual

Cleaning and Changing Filters

Engine Oil Filter

Using the oil filter wrench to loosen the filter, turn the filter
anticlockwise to remove it. Lightly grease the new oil filter
sealing to fix it in the correct position and perfect
tightness. Turn clockwise until the sealing reaches the
base, then rotate another 2/3 turn to tighten it properly.
1. Engine Oil Filter

Cleaning Oil Water Separator of Fuel Filter

1 - Fuel filter
2 - Main Fuel filter
3 - Pre Fuel filter
Change / Vent Fuel Pre-Filter
1. Fuel Supply to the Pump
2. Venting Screw
3. Electrical Connection of the Water Level Sensor
4. Drain Plug
5. Filter Element
6. Fuel Supply from Fuel Tank
MAINTENANCE
HODP118
HODP119
HODP120
93