Changing Oil In The Front Axle - Zetor UTILIX CL Operator's Manual

Changing oil in the front axle

Refill the transmission to the correct level on the dipstick with new oil.
Capacity: 10 L (2.65 US gal)
1 - Upper level
2 - Lower level
1 - Top plug (Vent plug)
1 - Level gauge & oil filler
2 - Front axle oil drain plug
Important: Some operators have found that when they fill with the correct amount of oil and dip
it, the oil level on the dipstick is too high due to the fact that it takes a while for the oil to run into the
final drives. Opening the vent plugs helps to speed this up.
CONTROLS, INSTRUMENTS & OPERATIONS
90
U18N078
UCL18N066
U18N079