Shuttle Shift Lever - Cl Model - Zetor HORTUS HS Series Operator's Manual

Shuttle Shift Lever - CL MODEL

This control allows shifting from forward to reverse &
reverse to forward. When stationary set the lever to ''N'' for
neutral.
Push the lever away from the driver engages

forward.
Pulling the lever towards the driver engages

reverse.
1 - Shuttle Shift Lever
Important: Press clutch pedal fully before operating shuttle shift lever.
Important: When changing from forward to reverse or back to forward again while in high
range make sure the tractor comes to a stop before changing direction. Failure to do so is likely to
result in damage to the mechanism and place the driver at risk of injury.
Caution:
Operate the shuttle shift only while seated on the tractor.

Do not use the shuttle shift lever to start the tractor for towing or traveling uphill, use the

clutch instead.
Always stop the tractor before getting off.

54
DESCRIPTION OF TRACTOR CONTROLS
HODP061