Replacing Fuses; Main Fuses - Zetor HORTUS HS Series Operator's Manual

Replacing Fuses

1 - Normal condition
2 - Blown
The circuit has 8 blade type fuses in its wiring circuit.
When a fuse has blown replace it with one of the same value.
Using a large capacity fuse or wire burn out the wiring system.
Use fuse tongs to replace fuses.

Main Fuses

The wiring harness is equipped with three main fuses to
protect electrical devices.
However, when the main fuse blows, the whole circuit
does not work.
Always check the reason and repair it before replacing the
fuse for the fuse of the same value.
To indicated the blown fuse, it will be discolored.
Important:
Always check the reason for a blown fuse otherwise the new fuse is also likely to blow.

Never ever use wire in place of correct grade fuse.
104
MAINTENANCE
HODP141
HODP142