Midas PRO6 Owner's Manual page 79

How to navigate
Selecting channels, mix buses and groups
There are a number of ways you can select a channel/mix bus from those currently
populating the control surface, particularly by using the quick access buttons.
>> To select an input channel
Do one of the following:
• Press its LCD select button.
• Press any of its quick access buttons. This will also assign the channel to the
channel strip and its processing area to the GUI channel strip.
• Scroll to the input channel using the scroll by 1 buttons in the channel select
(upper) section.
>> To select an output channel
Do one of the following:
• Press its quick access button. This will also assign the channel to the channel strip
(control surface and GUI).
• Scroll to the output channel using the scroll by 1 buttons in the channel select
(upper) section.
>> To select a mix bus
Scroll to the mix bus using the scroll by 1 buttons in the mix section.
>> To select a group
Press and hold down its LCD select button.
Navigating a processing area or mix bus to a channel strip
You may want a specific processing area assigned to a channel strip, for example, to
carry out processing or for copying to other channels. Or, you may want to carry out
detailed processing on the currently selected mix bus, but it may not necessarily be
assigned to its associated channel strip.
>> To navigate a processing area to a channel strip
Do one of the following:
• If its channel is already selected, press its quick access button in the channel strip.
This will also assign the channel to the channel strip (control surface and GUI).
• If its channel is at the control surface, but is not currently selected, press its quick
access button in the fast strip.
>> To navigate the selected mix bus to a channel strip
Press the quick access button in the mix section. This does not affect the current
population of the output fast zone.
PRO6 Live Audio System
Owner's Manual
53