Midas PRO6 Owner's Manual page 259

GUI Delay Compensation options
Section Option
Aux Insert
Sends
Aux Send-
Sends FX-
Return
Aux Graphic
Sends EQ
Master Insert
and
Matrix
Master Graphic
and EQ
Matrix
PRO6 Live Audio System
Owner's Manual
Description
Compensates for inserts
placed in aux buses. To do
this it modifies the delay that
sits between the input
channel outputs and
master/matrix channel
inputs, so that signals fed
from inputs to masters will
line up with signals fed from
inputs through auxes to
masters.
This option compensates the
inputs to master and matrix
paths for the signal path
between an aux through an
effect, and back through a
return to the master and
matrix channels.
This setting controls the delay
compensation that aligns aux
bus outputs for channels
which do use GEQ with those
that do not.
Time-aligns the output of all
the master and matrix
channels, regardless of
whether or not they have an
active insert. With this option
switched off, the outputs of
any master or matrix
channels using inserts will be
delayed relative to the
equivalent channels not using
them.
This option controls the delay
compensation that aligns
master and matrix bus
outputs for channels using
GEQ with those that do not.
Recommendations
If there are no inserts on any
aux channels, switch this
option off to reduce overall
system latency.
If any aux channel has an
insert, switch this option on.
If the Monitor Mode (Align
with Masters) option is
selected, it is prudent to
switch this option off.
If no effects are used between
the aux and return channels,
switch this option off so that
overall system latency will be
reduced.
If any effects are used
between any auxes and
returns, switch this option on.
If the Monitor Mode (Align
with Masters) option is
selected, it is prudent to
switch this option off.
If no aux buses use GEQ,
switch this option off to
reduce overall system latency.
If any aux bus has a GEQ
inserted, switch this option on
to ensure all aux bus outputs
are time-aligned.
If no inserts are used in the
master/matrix channel layer,
switch this option off to
reduce overall system latency.
If Inserts are used in any
master/matrix channels,
switch this option on.
If no master or matrix buses
are using GEQ, switch this
option off to reduce overall
system latency.
If any master or matrix buses
have a GEQ inserted, switch
this option on to time-align all
master and matrix bus
outputs.
233
Latency
(ms)
1.11
1.11
0.7
1.11
0.7