Changing The Linking Options - Midas PRO6 Owner's Manual

108

Changing the linking options

You can choose which control options will be linked across the channel pair. There are
two ways to do this: globally and per pair. The per pair settings always override the
global ones. For details of the linked parameters for each section, see Appendix
O "Parameters Affected By Stereo Linking" on page 499.
>> To set the global default stereo linking options
1
At the GUI, choose
home
will open the Stereo Linking Default
Settings window (shown right),
which is divided into channel types.
2
In a channel section, select the
desired default stereo linking options
and then click the Change Existing
button directly underneath.
Repeat as necessary for any other
channels.
Selected control options will be linked across
the channel pair of the appropriate type.
Unselected controls remain independent on
each channel.
>> To set the stereo linking options for a channel pair
1
Make sure that one of the paired channels is selected and its configuration
processing area is assigned to the GUI channel strip. Then open the Stereo
Linking Options by clicking the st. linking options button in the GUI channel
strip.
2
Select the controls that you want linked across the channel
pair. A typical Stereo Linking Options window is shown
right. The active options will be channel dependent.
3
Click CLOSE.
Preferences Linking. This
Chapter 10: Stereo Linking
PRO6 Live Audio System
Owner's Manual