Midas PRO6 Owner's Manual page 222

196
>> To select a single parameter section console wide
1
Click CONSOLE WIDE.
2
In any area of the screen, click
the desired parameter section.
For example, click the Fader
parameter of input channel 1:
every Fader parameter on the
screen is selected (as shown
right).
>> To select every parameter section on the console
Click ALL. Every parameter section on
the Recall Scope screen is selected (as
shown right).
>> To deselect a parameter section(s)
Follow the procedures for selecting parameters, but only click ones that are already
selected.
Chapter 21: Scope (Automation)
PRO6 Live Audio System
Owner's Manual