Midas PRO6 Owner's Manual page 146

120
The effects of using the solo A and B buttons in combination are shown in the following
table.
Solo A
Off
On
Off
On
The effects of using the solo destination controls are shown in the following table.
Table 6: Solo A/B destination controls
Control
PFL direct input
AFL direct input
PFL direct output
AFL direct output
Solo add:
• On (additive solos)
• Off (self-cancelling solos)
Solo clear:
• On (some solo A solos)
• Off (no solo A solos)
Solo PFL:
• PFL (solo pre-fader)
• AFL (solo after-fader)
Solo in place (SIP):
• On (SIP active)
• Off (SIP inactive)
Solo B Effect
Off Solo goes to the A bus, but there is no solo in
operation.
Off Solo goes to the solo A bus.
On Solo goes to the solo B bus.
On Solo goes to the solo A bus.
Description
Direct inject to solo A from linked control centre,
active only while solo A is PFL.
Direct inject to solo A from linked control centre,
active only while solo A is AFL.
Mono summed direct output from solo A for linking to
another console.
Stereo direct output from solo A for linking to
another console.
Disables self-cancelling solo A/B solos. (When
self-cancelling solos are selected, that is, with solo
add mode off, the solo being cancelled should be
deactivated before activating a new solo.)
Single button clearing of currently active solo A/B
solos.
Switch all current and future solo A/B activations to
send the solo A/B bus pre-fader.
When active, SIP mutes all channels except the one
being soloed. However, the audio of the soloed
channels is still placed on the monitor outputs. For
more information on SIP, see "Solo in place (SIP)" on
page 121.
Chapter 12: Soloing
PRO6 Live Audio System
Owner's Manual