Updating Firmware Using Gui Configurator - Extron electronics TouchLink TLP 710MV User Manual

3.
Also from the
panel. Click the Firmware link on the left sidebar.
Figure 23.
4. Navigate to the TLP 710MV or TLP 710TV firmware and click Download.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
5.
Open the Extron Firmware Loader by clicking on the desktop icon.
6. Select TLP 710MV or TLP 710TV from the Device drop-down menu.
7. Select TCP/IP from the Connection Method drop-down menu.
8.
Enter the IP address for the TLP 710, a Telnet port number (usually 23), and a
password.
9.
In the New Firmware File "Path" pane, navigate to the file that was saved in step 4.
Click the Add button. The main Firmware Loader screen opens with the TLP 710MV or
TLP 710TV listed in the device pane.
10. Click Begin. The firmware transfer begins and takes approximately three minutes.
When the Total Progress box shows "Completed," select Exit from the File menu
to exit Firmware Loader.

Updating Firmware Using GUI Configurator

Set up the computer and touchpanel as described in steps 1 and 2 in the previous section
("Updating Firmware Using Extron Firmware
Firmware Loader utility onto the computer (see
1.
Find the firmware file on the Extron Website and download it to your computer, as
described in steps 4 and 5 in the previous section.
2.
Open GUI Configurator.
3. Open Firmware Loader by selecting Firmware Update Manager... in the Tools
menu.
Figure 24.
4.
Follow steps 7 through 10 in the previous section
Extron Firmware
Extron Download page, download the firmware for the TouchLink
Extron Web Page — Download Center
Opening Firmware Loader from GUI Configurator
Loader").
TLP 710MV and TLP 710TV • Configuration Software
Loader"). If necessary, install the Extron
"Installing the Software").
("Updating Firmware Using
22